Eurorack Synthesizers
The modular synth format that lets you build your own instrument, one module at a time. Here's what it is, how it works and how to get started.
What is Eurorack?
A modular synthesizer is an instrument split into separate pieces called modules. Each module does one job (make a sound, shape it, or control it), and you connect them with patch cables to decide how sound and control signals flow. No two systems are alike, because you pick every piece.
Eurorack is the most popular modular format in the world. It was introduced by the German company Doepfer in the mid-1990s with its A-100 system, and because the standard is open, hundreds of makers now build compatible modules. That means a module from one brand fits and works in a case from another.
The core building blocks
Oscillators (VCO)
The sound source. They generate raw waveforms like sine, saw and square at a pitch you control.
Filters (VCF)
Shape the tone by removing or emphasizing frequencies. This is where a lot of a synth's character comes from.
Amplifiers (VCA)
Control volume. Paired with an envelope, a VCA makes notes start and stop instead of droning forever.
Envelopes
Create a shape over time (attack, decay, sustain, release) to move volume, filters or anything else.
LFOs
Slow, repeating waves that add movement: vibrato, wobble, sweeps and rhythmic pulses.
Sequencers & MIDI
Tell the system which notes to play and when, either from a built-in pattern or from a keyboard or computer.
How it all connects
Eurorack modules talk to each other with control voltage (CV). Instead of a knob being turned by your hand, a voltage from another module turns it for you. Pitch usually follows the 1 volt per octave standard, so raising a signal by one volt raises the note by one octave.
Alongside CV you'll see gates and triggers: on/off signals that say "play a note now." A classic first patch is sequencer → oscillator → filter → VCA → speakers, with an envelope opening the VCA each time the sequencer sends a gate.
Getting started
- Learn on something smaller first.A semi-modular synth has a full voice built in and works without cables, but has patch points so you can learn routing as you go.
- Choose a powered case.Cases are measured in HP and rows. Make sure the power supply has enough current for everything you plan to add. See the Eurorack Cases guide.
- Build one complete voice.Oscillator, filter, VCA, envelope, LFO and a way to get notes in (MIDI or a sequencer), plus an output module to reach headphones or speakers.
- Add slowly.Live with each module for a while before buying the next. Free online planners let you lay out a rack before spending money.
- Check power cables twice.Ribbon cables have a red stripe that marks −12V. Plugging one in backwards can damage a module, so match the stripe to the markings every time.
Got an Eurorack question?
Building your first rack or stuck on a patch? Ask away and Steve will point you in the right direction.
Get in touch